Daily/networking/openwrt/2020 06 04 - openwrt@lab5l6l0.md

http://192.168.1.1 manual config Linksys config panel, pass: admin connectivity, flash firmware https://downloads.openwrt.org/releases/19.07.2/targets/ipq40xx/generic/openwrt-19.07.2-ipq40xx-generic-linksys_ea6350v3-squashfs-factory.bin http://192.168.1.1 LuCi, pass: admin system

system
    general
        sync time from browser
        hostname: xxxx
        timezone: xxxx
        [save]
    time synchronization
        [x] enable NTP client
        NTP server: xxxx
administration
    router pass: set pass
    ssh access, check that enabled

network

interfaces:
    LAN:
        general:
            static:
                192.168.5.1/255.255.255.0
            [disable] IPv6 assignment length
        advanced:
            [ ] ipv6 management
            [ ] force link
        DHCP-server:
            IPv6: disable everything

[save&apply] [unsaved changed, apply&restart] quickly reconnect ethernet cable, renew DHCP login to apply settings (otherwise they will be reverted) http://192.168.5.1

network

wireless
    radio0, Generic 802.11bgn, scan
    (tablet-ssid)
        [x] replace wireless configuration
        name: wwan
        [x] lock to BSSID
        Create/assign firewall-zone: wan
    check:
        general
            mode: client
            ESSID: (tablet-ssid)
            network: wwan

[save] [save&apply]

status

overview
    check that connected

network

wireless
    remove "openwrt"
    radio1, Generic 802.11nac, scan for free channel
    radio1, Generic 802.11nac, add
        general
            set channel
            mode: access point
            ESSID: xxx
            network: LAN
        wireless security
            encryption: WPA2-PSK
            cipher: auto
            key: wlan pass

[save] [save&apply]

#

softflowd

# system

software
    update lists
    filter: softflowd, install