- cleaning /A

read_temperature_from_ds18x20_sensors/README.md

@@ -1,72 +0,0 @@
-#
-# 2022 03 18  + published on https://github.com/InstallAndUse/RPi /A
-#
-
-
-# INSTALLATION:
-
- sudo su
-# raspi-config, 5. interfaceing, P7 1-wire, enable, yes. reboot
- ls -la /sys/bus/w1/devices/*
-     lrwxrwxrwx 1 root root 0 Jun 12 12:18 /sys/bus/w1/devices/00-200000000000 -> ../../../devices/w1_bus_master1/00-200000000000
-     lrwxrwxrwx 1 root root 0 Jun 12 12:18 /sys/bus/w1/devices/00-a00000000000 -> ../../../devices/w1_bus_master1/00-a00000000000
-     lrwxrwxrwx 1 root root 0 Jun 12 12:13 /sys/bus/w1/devices/w1_bus_master1 -> ../../../devices/w1_bus_master1#
-
-
-# when sensors connected:
-# (connect VCC to 5V, GND to GND, DATA to TXD PIN, remember to put resistor 4.7 kOhm between VCC and DATA)
- ls -la /sys/bus/w1/devices/*
-     lrwxrwxrwx 1 root root 0 Jun 12 12:20 /sys/bus/w1/devices/00-600000000000 -> ../../../devices/w1_bus_master1/00-600000000000
-     lrwxrwxrwx 1 root root 0 Jun 12 12:20 /sys/bus/w1/devices/00-e00000000000 -> ../../../devices/w1_bus_master1/00-e00000000000
-     lrwxrwxrwx 1 root root 0 Jun 12 12:20 /sys/bus/w1/devices/10-000800e489b3 -> ../../../devices/w1_bus_master1/10-000800e489b3   <-- this is first sensor
-     lrwxrwxrwx 1 root root 0 Jun 12 12:20 /sys/bus/w1/devices/10-00080280a759 -> ../../../devices/w1_bus_master1/10-00080280a759   <-- this is second sensor
-     lrwxrwxrwx 1 root root 0 Jun 12 12:18 /sys/bus/w1/devices/w1_bus_master1 -> ../../../devices/w1_bus_master1#
-
-
-# save this script (read_ds18x20.py) and bash script (read_ds18x20.psh) to /home/pi/meter
- chmod +x /home/pi/meter/*
- ls -la /home/pi/meter/*
-
-
-# check you have python installed (probabaly on RPi it is)
- which python
-     /usr/bin/python
- root@(host):/home/pi/meter# ./read_ds18x20.py
-     /sys/bus/w1/devices/10-000800e489b3;27000
-     /sys/bus/w1/devices/10-00080280a759;29500#
-
-
- change DB credentials in shell script (user) and (pass)
- nano ./read_ds18x20.sh
- pi@(host):~/meter $ ./read_ds18x20.py | ./read_ds18x20.sh
-     INSERT 0 1
-     INSERT 0 1
-
-
-# set peiodic check with cron (good idea to setup cron for root, because future checks will be consolidated in one place)
- sudo
- crontab -e
-     */1 * * * * /home/pi/meter/read_ds18x20.py | /home/pi/meter/read_ds18x20.sh
-
-
-# check that cron is working:
- tail -f /var/log/syslog | grep CRON
-     Jun 12 12:47:01 lab5rp41 CRON[1507]: (root) CMD (/home/pi/meter/read_ds18x20.py | /home/pi/meter/read_ds18x20.sh)
-     Jun 12 12:47:04 lab5rp41 CRON[1503]: (CRON) info (No MTA installed, discarding output)#
-
-
-# check that entries actually written to db
- psql -h (host_ip) -U (user2) -d (db) -c "SELECT * FROM telemetry_host;"
-     Password for user (host):
-                timestamp           | value |                              sensor
-     -------------------------------+-------+------------------------------------------------------------------
-      2020-06-12 08:58:36.732033+01 | 12345 | test_sensor
-      2020-06-12 10:38:12.519066+01 | 27500 | /sys/bus/w1/devices/10-000800e489b3
-      2020-06-12 10:38:12.68798+01  | 29000 | /sys/bus/w1/devices/10-00080280a759
-      2020-06-12 10:38:47.060764+01 | 27000 | /sys/bus/w1/devices/10-000800e489b3
-      2020-06-12 10:38:47.222548+01 | 28937 | /sys/bus/w1/devices/10-00080280a759
-      2020-06-12 10:46:38.363432+01 | 27062 | /sys/bus/w1/devices/10-000800e489b3
-      2020-06-12 10:46:38.552815+01 | 28812 | /sys/bus/w1/devices/10-00080280a759
-      2020-06-12 10:47:03.880082+01 | 27687 | /sys/bus/w1/devices/10-000800e489b3
-      2020-06-12 10:47:04.031554+01 | 28750 | /sys/bus/w1/devices/10-00080280a759
-     (9 rows)

read_temperature_from_ds18x20_sensors/read_ds18x20.py

@@ -1,32 +0,0 @@
-#!/usr/bin/python
-#
-# read DS18b20 or DS1820 sensors
-#
-# 2020 05 07  * initial code for DS18B20 /A
-# 2020 05 08  + multi sensor support /A
-#             + DS1820 support /A
-#             * return in millidegrees (get rid of float)
-# 2020 06 12  + install doc added /A
-# 2022 03 18  + published on https://github.com/InstallAndUse/RPi /A
-#             * moved doc to separate README.md file /A
-#
-
-
-#
-# TODO:
-#
-#
-
-
-
-import glob
-
-base_dir = '/sys/bus/w1/devices/'
-sensors = glob.glob(base_dir + '[28|10]*')
-for sensor in sensors:
-    f = open(sensor + '/w1_slave', 'r')
-    lines = f.readlines()
-    f.close()
-    if lines[0].strip()[-3:] == 'YES':
-        value = lines[1][lines[1].find('t=')+2:]
-    print("%s;%s" %(sensor, value))

read_temperature_from_ds18x20_sensors/read_ds18x20.sh

@@ -1,19 +0,0 @@
-#!/bin/bash
-#
-# history and doc, refer to read_ds18x20.py /A
-#
-# 2022 03 18  + published on https://github.com/InstallAndUse/RPi /A
-
-host="(host)"
-user="(user)"
-export PGPASSWORD="(dbpass)";
-db="(dbname)"
-table="(dbtable)"
-
-while read line                      # read values for each sensor
-    do
-        values=(${line//;/ })        # split by ";" and build array
-        if [ -n "$values" ]; then    # if array is not empty (empty line) write to DB
-            echo "INSERT INTO ${table} (timestamp, sensor, value) VALUES (NOW(),'${values[0]}','${values[1]}')" | psql -h ${host} -U ${user} -d ${db}
-        fi
-    done < "${1:-/dev/stdin}"        # read stdin from python script (read sensors)